Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
November 23rd, 2010, 3:23
Hi All,
Accidently used HDD LLF Low Level Format Tool 2.36 to low-level format 4Gb NTFS stick. Is there any hope of recovering data at all ?
November 23rd, 2010, 3:25
Well, there is always hope, you may download some demo app. like: r-studio for example and give it a shot
see if it works
but my guess is always possible
November 23rd, 2010, 3:31
What actually happens to usb flash drive during a low-level format ?
November 23rd, 2010, 3:37
Every byte is replaced by 00.
No hope if you ask me.
Dobre
November 23rd, 2010, 3:54
dobrevjetser wrote:Every byte is replaced by 00.
No hope if you ask me.
Dobre
Agree, no hope at all I'm afraid if a proper LLF has been performed. The data is gone.
November 23rd, 2010, 6:53
yes , all data is lost! data =000000
November 23rd, 2010, 7:14
am gonna do small test on one of the hdd here, but am really expecting something as a result probably in RAW, will see.
thnx for the info
November 23rd, 2010, 7:17
If the LLF stopped immediately after starting, maybe there is *some* hope, if LLF finished, data is gone.
November 23rd, 2010, 9:19
I apologize guys, I also have a problem that is described here :
help-wdc-wd6401aals-00j7b1-internal-error-t17753.htmlI kindly ask you to give me a help, and I still ask excuse. Thanks!
Powered by phpBB © phpBB Group.