ST9250315AS-visible in BIOS but cannot be visible in OS

[Kleszcz25]

Hi, problem like described in subject.
HDD visible in BIOS but cannot be visible in OS (Win XP)

I tried to checki it in VICTORIA and HDTune255 and I can find disk but only 8GB!
VICTORIA message
Get drive passport: Drive error!
Get SMART command... Error reading SMART!
http://obrazki.elektroda.pl/9562826600_1298067463.html
http://obrazki.elektroda.pl/4438545900_1298067646.html

Checked on two PC and same results. I only want to collect data from it.
Next I tried MHDD:
MHDD>eid
[PRE]
51 ERR INDX CORR DREQ DRSC WRFT DRDY BUSY AMNF T0NF ABRT IDNF UNCR BBK 04
[ST9250315AS ] [ 0] [ ] [ ]
SN:5VC8KA1H FW:0010 CACHE:8192KB
Supports: LBA48 HPA DLMC LBA MS16 DMA (UDMA5,MWDMA2)
SMART: Enabled SelfTest: Supported ErrorLog: Supported
Security: high, OFF. Size = 0MB
IMPORTANT NOTICE: This device does not
support LBA mode. MHDD will NOT work with this device.

MHDD>rhpa
ST9250315AS LBA:0 BIOS: 81H
SN:5VC8KA1H FW:0010 CACHE:8192KB Size = 0MB
IMPORTANT NOTICE: This device does not
support LBA mode. MHDD will NOT work with this device.
Init drive: [RECAL]
RECAL FAIL
Read NHPA command...
Fail.
Done (RHPA).

Any way to force LBA mode ?

[sanlima]

hai risolto con il messaggio di errore get drive passport error in victoria???
come???

[labtech]

You likely have a firmware issue, but a professional diagnostic is best if data is of the outmost importance.

[sanlima]

I would like to continue ...
but you have tested victoria pass to unlock hard drive?

[sanlima]

what firmware??

[mr_spokk]

what firmware??

You can always use the search button, it's there for purpose
Seagate and 0Mb is a well discussed topic.

Bosse

[labtech]

what firmware??

This is firmware in reference to the "programming code" if you will that operates the drive.