7200.11 InitiateMarkPendingReallocateRequest for disk_lba:

[Shortscurcuits]

Hi Just wondering if BlackST or Jose or anyone else could give me a quick PM or heads up.

310000340AS with SD15 firmware.

Terminal:

Rst 0x20M

Then shows InitiateMarkPendingReallocateRequest for disk_lba: for about 200 addresses then stops:

Not all addresses are sequential.

Data not critical but last backup was about 2 weeks ago : (

Been too busy working to play with HDD lately.

Best guess PCB, head or firmware.

Thx

[BlackST]

'stops' mean no more output and drive STUCK BSY or ready and inoperative ?
I would check heads always especially for weakness, then firmware. Pcb to me is unlike...

[Shortscurcuits]

Thanks BlackST for quick reply:

Need to correct first post is a 31000333AS firmware CC1H.

The other 31000340AS drive has 0LBA issue but needs PCB also.

Here is terminal log:

Rst 0x20M
(P) SATA Reset
PASSPackage Verified
No Phy: Staggered spin bypass
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC5A
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC5B
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC5C
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC5E
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC61
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC62
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC66
InitiateMarkPendingReallocateRequest for disc
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC68
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC69
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC6A
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC6C
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC6D
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC6F
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC70
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC81
InitiateMarkPendingReallocateRequest
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC9A
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC9B
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC9C
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC9D
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC9E
InitiateMarkPendingReallocateRequest for disc_lba: 0000BC9F
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCA0
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCA2
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCA3
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCA6
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCA7
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCA8
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCA9
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCAB
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCAC
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCAD
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCAE
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCAF
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB0
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB1
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB2
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB3
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB4
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB5
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB6
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB7
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB8
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCB9
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCBA
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCBB
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCBC
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCBD

Then HDD freezes

After power on cycle

Rst 0x20M
(P) SATA Reset
PASSPackage Verified
No Phy: Staggered spin bypass
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCBE
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCC7
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCC8
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCC9
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCCA
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCCB
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCCC
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCCD
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCCE
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCCF
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD0
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD1
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD3
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD4
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD6
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD7
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD8
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCD9
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCDA
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCDB
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCDC
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCDD
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCDE
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCDF
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE0
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE1
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE2
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE3
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE4
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE5
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE6
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE7
InitiateMarkPendingReallocateRequest for disc_lba: 0000BCE8

Freezes again. Drive still spinning,but no output to terminal, have to power cycle to get any response including ctrl-z to reach ASCII diag mode so I assume it is busy.

Cannot plug in sata line to see ATA register as it freezes computer.

Is there any list of terminal codes for this model so I can look further?

Thx Shortcurcuits.

[BlackST]

What tools (Pc3000, SD...) do you have ?

[Shortscurcuits]

I have PC-3000 but it is old PCI card I don't think this drive is supported. Was thinking about buying SD, but for me this is a hobby as I do automotive system work. PC3000 is about 16,000 to update here in Canada, too much money for a hobby, SD seagate is about 300.00, but I hear mixed feedback about their product : (

[BlackST]

I have some ideas that may work, I'll pm you later today.

[waqas_ali766]

use congen to stop these errors.
F3T> F0,0,22