Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
June 22nd, 2011, 20:24
Hi,
i am having issues with the above drive. drive will spin up, and become ready, will not show id and cannot be identified by PC3K
Currently this drive is unsupported by the tool.
i have rules out issues with the board as the board works fine on the donor drive
suspecting either head issue or firmware issues
looking for any ideas to proceed as pc3K does not support model
Thank you in advance
June 23rd, 2011, 2:25
Got pretty much similar issues.
Original drive was dropped and heads were bad. Replaced heads and now drive does not click, but comes DRDY after a while (wiit quiet "retry" noises) but with no ID.
Suspect FW issues, but like you say UDMA has no support.
I understand that HRT has support for this model, but not in English yet. Someone please correct me if I'm wrong?
Powered by phpBB © phpBB Group.