Seagate BlackArmor 400

[imaarouf]

I have 4 disks each 2 TB, configured as Raid five, I need to recover the data from the NAS array, i attached the drives as seen by R-studio, this may help

I need the offset parity and stripe size

thank you

I 've been told that Dr. Keiv will solve it, he is a professor in DR.

Attachments

[loki]

Have you tried http://runtime.org/nas-recovery.htm
It might be worth a try?

Loki

[einstein9]

yes dr.kiev is the one for RAID

[hddguy]

I have 4 disks each 2 TB, configured as Raid five, I need to recover the data from the NAS array, i attached the drives as seen by R-studio, this may help

I need the offset parity and stripe size

You are sure is configured as RAID5?

R-Studio can help, but does not handle EXT well. Use different software

You should ask client original problem and if any disks were offline during or before the main failure.

You try to rebuild already? What did you try?

Did you try NAS software from runtime software?

Do you have experience building RAID5 before?