ST - LP - Bsy, Terminal does not respond

[hugov]

Hello guys.

I'm not getting a fix 2TB Seagate LP.

I am using the terminal version: 6.1

Set the terminal settings equal those of 7200.12 / LP, as found in the old forum topics.

However, there may not after setting it gave me F3.

When I give a CTRL + Z, I just returned arrows (-> ->)

I've tried isolating the engine with a card, but the answers are always the same.

I'm putting the report of the terminal, if anyone knows what is happening;

_______________________________________________________________________

Rst 0x40M
MC Internal LPC Process
FAIL Op=0900 Resp=0005
(P) SATA Reset

SIM Error 1009
RW Error 00000080
User Data Base 00991B20

MCMainPOR: Start:
Check MCMT Version: Current
MCMainPOR: Non-Init Case
MC Seg Disc and Cache Nodes: 4011A58C 4011869C
Seg Write Preamble VBM start: 000010A7 end: 000010CE
Footer - start: 000010D0 end: 000010F7
Seg Read Preamble VBM - start: 000010F9 end: 00001120
Footer - start: 00001122 end: 00001149
Reconstruction: MCMT Reconstruction Start
Max number of MC segments 22E0
Nonvolatile MCMT sequence number 000022AC
[RSRS] 1EFE
Reconstruction: Completed 0: MCMT Was Valid, HeadPtr was unwritten
Rst 0x40M
MC Internal LPC Process

LED:000000BD FAddr:00005652

->
___________________________________________________

Thanks to all who help.