How To Recovery Raid 0

[hasna]

I have 2 harddisk Sata 500gb, with hp Smart Array 600 , Server was Died. I didn't know original raid configurations but have 3 partition (c,d,e).
I was try to reconstructur with Raid 0, Stripe Size 64kb, start sector 0 ( Recomended Runtime Raid Reconstructor), but only partition e can open (folder displayed with corrupted file).

Size Start header for Raid 0 hp smart Array?

Thanks .

Attachments

raid0.rar

(472.07 KiB) Downloaded 284 times

[hddguy]

Both disks have MBR. Seems you have initialized second disk and windows has wrote new MBR to it. This is why working from imaged copies is preferred.

Size Start header for Raid 0 hp smart Array?

Here you have no offset. Start sector is 0.

If there is problem with configuration then it is with block size. Possibly you have damage to data. Try smaller block size first.

[ici_lemmy]

Most of the time, for HP raid, you have another parameter to find : delay !
EDIT : my mistake : not for raid 0. Sorry

Last edited by ici_lemmy on November 21st, 2011, 8:56, edited 1 time in total.

[hddguy]

For info : most of the time, for HP raid, you have another parameter to find : delay !

Not in a striped array you dont

[hddguy]

EDIT : my mistake : not for raid 0. Sorry

[ici_lemmy]

Not in a striped array you dont

I corrected myself while you responded.
Again, sorry !
EDIT : hddguy, you're too fast for me !