Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
December 8th, 2011, 19:17
Having an issue with this 2TB LP.
The only thing I can get when I open up terminal and the drive becomes ready is
FAIL Op=0165 Resp=0005
FAIL Op=0055 Resp=0005
FAIL Op=0165 Resp=0005
FAIL Op=0065 Resp=0005
FAIL Op=0165 Resp=0005
FAIL Op=0065 Resp=0005
FAIL Op=0165 Resp=0005
FAIL Op=0055 Resp=0005
FAIL Op=0165 Resp=0005
FAIL Op=0065 Resp=0005
FAIL Op=0165 Resp=0005
FAIL Op=0065 Resp=0005
.... just keeps going
If I try to get to terminal with just the PCB it will never become ready. Anyone have any ideas?
Tried all the normal fixes and with it being an LP i can't locate the proper short points for a r/w short.
Drive sounds fine and calibrates great, heads tested in another drive fine.
Any thoughts?
Were using PC3k UDMA and also have Salvation Data HD Doctor
Powered by phpBB © phpBB Group.