Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

wd20ears ready but mb(0)

December 14th, 2011, 22:22

Hi
WD20EARS-00MVWB0 NO CLICK CAN READY BUT MB(0)

Image

Techno mode key
Techno mode key......................... : Ok

ROM:
Flash Dir reading....................... : Ok
Dir info (0B)........................... : 0 (24)
Extended flash Dir reading.............. : Ok
Dir info (20B).......................... : 377 653 (24)
ROM reading............................. : Ok
ROM Data size........................... : 256 Kb
ROM version............................. : 25.12E
ROM generation.......................... : 25.12E
Link table version...................... : 0B.36.
Caclulated Version...................... : 00250012

Heads configuration..................... : by map
Heads number............................ : 6
Heads number in use..................... : 6
Switched off heads...................... : No
Head map................................ : 0,1,2,3,6,7
ROM Firmware version.................... : 00250012

Re: wd20ears ready but mb(0)

December 14th, 2011, 23:35

Probably firmware corruption.

Re: wd20ears ready but mb(0)

December 15th, 2011, 1:50

Agree with Jono Ats it is not reading the serian number or FW and show 0 LBA more than likely it is FW corruptions. Find donor FW for this one
Post a reply