HM321HI stays busy

[Vorian]

Hi,

I have this HM321HI that stays BSY. Terminal log is

Code:

*PA VID=0007 PN=0000 Rev=0004
*PA VID=0007 PN=0000 Rev=0004
ChipRev = 63B0
U
S_0Shock Sensor Circuit Enabled
SO_1
Shock Sensor Circuit Enabled
IS=5
CLA #36/37
Handoff RPM=576
SPOK
mS1 00000003
A1O=117 A1G=418
O=513 S=-1
SK C:  4463 H:0
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000FA
Zh:00000080 Curr:000000C5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000C5
Zh:00000080 Curr:000000C7
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000E7
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D6
Loaded FIT ( 0: 0: 1)
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000E4
Zh:00000080 Curr:000000D4
Zh:00000080 Curr:000000E5
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000F6
Zh:00000080 Curr:000000C7
Zh:00000080 Curr:000000D5
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000C6
Zh:00000080 Curr:000000C6
Zh:00000080 Curr:000000E6
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E7
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000E6
Zh:00000080 Curr:000000D6
Zh:00000080 Curr:000000D6
|   4 | MLIST    |  0 | 0 |   10 | 1340 |
CalibTable Loaded. Rev:0x17
ResoTable Loaded. Rev:0x01
RRO1xTable Loaded. Rev:0x01
Zh:00000062 Curr:000000B7
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A5
Zh:00000062 Curr:0000009B
Zh:00000062 Curr:00000083
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A4
Zh:00000062 Curr:00000096
Zh:00000062 Curr:00000083
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:00000098
| 157 | PARAM_DM |  0 | 0 |  167 | 1140 |
Zh:00000062 Curr:000000FD
Zh:00000062 Curr:00000086
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B5
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:00000097
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A5
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B6
Zh:00000062 Curr:000000B5
Zh:00000062 Curr:00000095
Zh:00000062 Curr:00000086
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A6
Zh:00000062 Curr:000000A5
Zh:00000062 Curr:000000A7
Zh:00000062 Curr:000000B5
Zh:00000062 Curr:000000B7
Zh:00000062 Curr:000000B7
| 115 | MOVLY001 |  1 | 0 |   10 | 1340 |
Zh:00000063 Curr:00000091
Zh:00000063 Curr:00000099
Zh:00000063 Curr:000000A7
Zh:00000063 Curr:000000A6
Zh:00000063 Curr:000000A9
Zh:00000063 Curr:00000092
Zh:00000063 Curr:00000095
Zh:00000063 Curr:000000A7
Zh:00000063 Curr:000000A6
Zh:00000063 Curr:000000A9
Zh:00000063 Curr:00000091
Zh:00000063 Curr:00000098
Zh:00000063 Curr:000000B6
Zh:00000063 Curr:000000A5
Zh:00000063 Curr:000000A9
| 115 | MOVLY001 |  1 | 1 |   10 | 1140 |
Overlay file read bad

[P_ABORT:04007B04:10063BA8]@0
L:04006000 A0A0A0A0 A0A0A0A0 A0A0A0A0 A0A0A0A0
L:04006010 A0A0A0A0 A0A0A0A0 A0A0A0A0 A0A0A0A0[/size]


Heads or bad modules?

Thank you

[dmarques]

Seems that cannot read anything, so I would go for heads.
Have you tried hotswap?

[BlackST]

No no ! something is read.

The problem is ELSEWHERE or a bit more complex

[Vorian]

This drive was part of a lot of donnors i bought. I don't have the tools to access the mc nor do i have a matching donnor. Blackst, could you give a little hint, just for my personnal knowledge ?

[BlackST]

Sorry , no.