HDDS WDC 3.5" Ramp p2-3 - New tool from HddSurgery

[helpdisc]

Dear friends and colleagues,

We are pleased to present You our new tools for Western Digital hard drives.

These new tools are slightly different than our previous ones because we have divided the process in two sections:
1. Head replacement process
2. Head unstick process

HDDS WDC 3.5" Ramp p2-3



These head unstick and replacement tools can be used on Western Digital hard drive models AAKS, AAJS, AAJB, AAKB, EADS, EARS and other models with 2 or 3 platters from following families:

Tornado, Tornado PATA, Tornado 2R, Tornado 2PMR, Tornado 2D, Atlantis, Atlantis PATA, Spider, Gekko, DragFly2, DragFly3, Kermit, Sadle G6, Sadle 2D and Sadle BK.

Find more info on our website here:
http://www.hddsurgery.com/tool/hdds-wdc-3-5-ramp-p2-3

For this tool, You can also check:

1. Video guide - http://www.hddsurgery.com/tool/hdds-wdc-3-5-ramp-p2-3&box=video
2. Animation - http://www.hddsurgery.com/tool/hdds-wdc-3-5-ramp-p2-3&box=animation
3. Manual - http://www.hddsurgery.com/dl/HDDS_WDC_3.5_Ramp_p2-3.pdf

All comments and suggestions are welcome!

[freakzy]

Another indispensable tool from you, Nikola. Very nice job !!!

[helpdisc]

Thanks, I must mention my collage Goran who did a looot of work.
Thank You for nice words, we are preparing 4 platter version very soon.

[poehere]

Nice job and this is a great tool you have fabricated. Look forward to seeing more of your tools. They are so professional and well fabricated

[loki]

Another great profession tool well done

[helpdisc]

thank You very much

[Nick_CT]

Great work

[Tawfeek]

i really like all your tools . it's good manufacturing and real professional

[helpdisc]

A lot of guys contact us with same question.

This is something new
We have made tools for wd with ramp's .
So You do not need to use unstick to remove heads. Just smaller head replacement tools.
It is all in video and animation, just a minute of time to wach.
Thanks all

[Touchclarity]

Any chance of manufacturing a set of the smaller head replacement tools for sale that fit the most common drives that have parking ramps that we can purchase without the larger unstick tool.....


Nice work as usual Nikola / Goran...

[helpdisc]

yes we can , and we are making...

[Alexii]

Heya Nicola. I just looked through the animation for head unstuck tool. Have a question. In my experience the extra smooth sliders and extra smooth platters create sticktion so severe that the heads just dont lift when the force is applied directly up... If they do lift - the slider stays at the platter with the wire holding it stretched like accordion.

[helpdisc]

Depends because You have never been able to move them up so precise.
Future will show. Once we had a head that was stuck so hard that we could not remove it . Like it was welded.
It helps in most of cases.
Ideas are welcomed