WD10TMVW-11ZSMS1 problem

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
F_ARG
  • F_ARG
  • Posts: 182
  • Joined: September 27th, 2010, 16:29
  • Location: Buenos Aires, Argentina

WD10TMVW-11ZSMS1 problem

February 9th, 2012, 21:10

Hello!

I have this hdd WD10TMVW-11ZSMS1 that is identified by OS as 0 bytes. I connect it using serial port to PC3K. I can access to WD application using 115200 baud rate, but not faster. I can see that all modules are fine and i can make a sector edit without error all around the hdd, but it s encrypted by sym chip. I try with WD Smartware but the hdd is not found. Someone got any clue? I think i am missing something... :roll:

Best regards,

F
pcimage
  • pcimage
  • Posts: 7864
  • Joined: November 29th, 2006, 10:08
  • Location: UK
  • Website

Re: WD10TMVW-11ZSMS1 problem

February 10th, 2012, 2:56

Move ROM to compatible SATA PCB.

Seen this many times.
F_ARG
  • F_ARG
  • Posts: 182
  • Joined: September 27th, 2010, 16:29
  • Location: Buenos Aires, Argentina

Re: WD10TMVW-11ZSMS1 problem

February 10th, 2012, 7:29

Thanks pcimage! I will!

Sorry for the double post, my mistake!

Best regards,

F
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index