How to deal with this one? Seagate 7200.9

[shahij]

Interface task reset
1024k x 16 SDRAM
TLITE - 1_Disk S-6B 03-22-06 10:53

Buzz - Head Mask FFFF - Switch to full int.
Spin Ready
(P)SATA Reset
DiskAccess ReadSector EC=47 at ffffffff.00.0002
Failed sys sect. write! Nwt Er 33 RdWr 1658d.00.0003
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=43 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Retrys
DiskAccess ReadSector EC=47 at ffffffff.00.0002

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 16587.00.0002
Unable To Load Overlay 01|000A
(
T>

[shahij]

Update after STUFF RESET

Head Mask FFFF - Switch to full int.
Spin Ready
(P)SATA Reset
Failed sys sect. write! Nwt Er 33 RdWr 16587.00.0003

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Retrys

Read Ver Failure!
Failed sys sect. write! Nwt Er 00 RdWr 16587.00.0003
Unable To Load Overlay 01|000A
(
T>

PS: THE CONSOLE SHOWS ALWAYS BUSY, NEVER READY

[hddguy]

Use a LDR or recover via Terminal in DE...

Assuming you have PC3000?

[shahij]

no, i don't have pc3k. sd only

[BlackST]

What did you do BEFORE the error ? Hope you have saved the entire SA, but as you are using SD you likely had hard times when working with the disk...

[northwind]

This is handled in UDMA, but with SD... good luck...

[BlackST]

Well, not only by UDMA...

[northwind]

Yes I meant UDMA can handle it. There are other ways too

[shahij]

The problem was fixed successfully... by using SD...

It's not the tool, it's the know-how... otherwise - no pc3k, or sd or anything else is going to help!

Thanks all...