ST1000DM003 Tests

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
Hussain
  • Hussain
  • Posts: 1
  • Joined: April 4th, 2012, 7:11
  • Location: Egypt

ST1000DM003 Tests

April 4th, 2012, 7:22

Hello , I recently bought a used seagate ST1000DM003 for cheap price , i ran some test to it using Aida64 , so i want to know if the hard disk have any problems , any help am grateful
read test suite.png

Random read.png

buffered Read.png

average read access.png

linear read.png
Vulcan
  • Vulcan
  • Posts: 2138
  • Joined: May 6th, 2008, 22:53
  • Location: England

Re: ST1000DM003 Tests

April 4th, 2012, 13:11

Hussain wrote:i want to know if the hard disk have any problems

I'm not familiar with that benchmark, to be able to compare all your results with other ones... At least the linear read graph looks approximately as I would expect.

I suggest reviewing the detailed SMART data from the disk (not only checking for pass/fail).

P.S. After collecting the full (raw) SMART data from that disk, then run a long SMART self test , gather the full (raw) SMART data again, and compare.

P.P.S. Re-run the "average read access" test and see if you get the same peak at approx 70%
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index