Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
May 6th, 2012, 11:56
Good Afternoon to every one
could you be able to advise on the attached photo for the markings that i made on A and B.
cheers
mik
- Attachments
-

May 6th, 2012, 16:12
AIUI, the pins numbered 27, 29, 31 are the Ground, Rx, and Tx pins for the Marvell MCU's serial console, not necessarily in that order.
The remaining pins in the 12-pin header are for LEDs and pushbutton switches for those models that support them.
The two pins on the left appear to be the (C)athode and (A)node terminals of an indicator LED.
Powered by phpBB © phpBB Group.