Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Firmware For WD1600BEKT

May 8th, 2012, 18:44

Hello. I have been given a HDD (a WD1600BEKT 2.5inch Laptop Drive) that has has the hardware flashed for usage with a XBOX 360. I am sure the software that was used to do this was HDDHACKR and i have been scanning the forums to try and find someone with a UNDO.BIN file so i can restore it. I am in hope that i can expand this drive back to it's full capacity and also in hope that someone may be able to asset me by providing the file. If there is any more information that i need to supply please ask and i will post it.

If this is possible, or if someone has any ideas please contact me.

Thanks in advance

Re: Firmware For WD1600BEKT

May 8th, 2012, 19:50

What do you mean by expanding it to a full capacity?

Re: Firmware For WD1600BEKT

May 8th, 2012, 22:24

See http://community.wdc.com/t5/Desktop/Ins ... 4055#M9066

Re: Firmware For WD1600BEKT

May 9th, 2012, 3:37

Hi yes, the modified firmware is for a Fujitsu 120Gb drive, so this is how it is seen by the system. I will look at the link, but at the moment their site is down!!! Lol prob a failed HDD!!!

Re: Firmware For WD1600BEKT

May 9th, 2012, 3:51

http://webcache.googleusercontent.com/s ... m-p/394055

Re: Firmware For WD1600BEKT

May 9th, 2012, 8:05

Hi There, The above post worked perfectly. I just replaced my drives physical information in the exact place described in the link the HDDSS.BIN file and reflashed the drive using HDDHACKR V1.30. I am very greatful

Kindest Regards

Bill
Post a reply