7200.12: spins, never ID's, terminal garbage

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
mediaman
  • mediaman
  • Posts: 249
  • Joined: September 11th, 2007, 13:35

7200.12: spins, never ID's, terminal garbage

June 22nd, 2012, 0:26

Terminal just gives garbage:

b?J(^A?Zb{?

any ideas? Not seen this before, and I am terrible with Seagate FW issues....

Many thanks
Nick_CT
  • Nick_CT
  • Posts: 1038
  • Joined: September 5th, 2010, 12:29
  • Location: South Africa

Re: 7200.12: spins, never ID's, terminal garbage

June 22nd, 2012, 1:16

Are you sure your baud rate is correct?
pcimage
  • pcimage
  • Posts: 7864
  • Joined: November 29th, 2006, 10:08
  • Location: UK
  • Website

Re: 7200.12: spins, never ID's, terminal garbage

June 22nd, 2012, 2:46

Should be 38400 as I recall.
northwind

Re: 7200.12: spins, never ID's, terminal garbage

June 22nd, 2012, 5:55

+1

your baud rate is wrong.
mediaman
  • mediaman
  • Posts: 249
  • Joined: September 11th, 2007, 13:35

Re: 7200.12: spins, never ID's, terminal garbage

June 22nd, 2012, 8:27

thanks for the input. baud rate is fine, 9600, atola default. tested: good similar disks read fine.

any more ideas?

FW is CC66, stays bsy
hddguy
  • hddguy
  • Posts: 2984
  • Joined: November 9th, 2006, 15:15

Re: 7200.12: spins, never ID's, terminal garbage

June 22nd, 2012, 8:28

mediaman wrote:thanks for the input. baud rate is fine, 9600,




pcimage wrote:Should be 38400 as I recall.
mediaman
  • mediaman
  • Posts: 249
  • Joined: September 11th, 2007, 13:35

Re: 7200.12: spins, never ID's, terminal garbage

June 22nd, 2012, 8:33

you were right guys. thanks!
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index