Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

wd1600js 22mhb0 firmware

October 5th, 2012, 3:02

Please , I need firmware for wd1600js 22mhb0

Thanks

Re: wd1600js 22mhb0 firmware

October 5th, 2012, 9:52

Any particular part of the firmware or all of it?
What version?
What fw tool are you using?

Re: wd1600js 22mhb0 firmware

October 29th, 2012, 6:53

Sorry , back online

mdl : wd1600js 22mhb0
date : 18 jan 2006
dcm : HSCACT2AH

I desolder 25P10VP chip and I use a programmer

Re: wd1600js 22mhb0 firmware

October 29th, 2012, 8:06

What is wrong with the drive?

What are you trying to accomplish?

Re: wd1600js 22mhb0 firmware

October 29th, 2012, 8:46

HDD is not recognized, no motor noise (almost dead)
Whit another PCB (wd1600js) but whit anoher model , hdd is power up, but is not recognized correctly. I desolder

Re: wd1600js 22mhb0 firmware

October 29th, 2012, 13:07

Ok, so that's good, but have to make sure the PCBs are compatible. Check the codes.

Re: wd1600js 22mhb0 firmware

October 30th, 2012, 8:29

I desolder 25P10VP chip from second PCB. Whit new chip , HDD turn on , but is not recognized correctly . I think if I have good firmware for wd1600js 22mhb0 is possible to solve problem

Re: wd1600js 22mhb0 firmware

October 30th, 2012, 9:10

No, that's not how it works. The 25P... chip from the bad PCB should be soldered to the second PCB, again as long as their compatible.

Re: wd1600js 22mhb0 firmware

October 31st, 2012, 9:31

I desolder just for test. PCB1=PCB2 , but software from 25P10VP from PCB1 <> software from PCB2.

In first post I say : "Please , I need firmware for wd1600js 22mhb0". So , I`m searching for this firmware
Post a reply