HDT721016SLA380

[crystalrajasthan]

I have a HDT721016SLA380 hdd. It start good no knocking sound giving DRD & DSC but not showing in utility. I run utility manually and there I read SA, as it have some corruption. I have attached the SA info.

Any help is appreciated.

Attachments

HDT721016SLA380.log

(2.45 KiB) Downloaded 480 times

[crystalrajasthan]

The follwing is the info readed from the hdd, but no access to it's Mdl No., S/N, Capacity and it's Data.
Any help is appreciated.

Module RSVD............................. : Ok
Module USAG............................. : Ok
Module not read (PSHT)
Error : Device error detected (UNC)
Module not read (PSHT)
Error : Device error detected (UNC)
Device error detected (UNC)
Device error detected (UNC)
Module PSHT............................. : Error
Error : ModStg: composite reading impossible - reading error!
Module RDMT............................. : Ok
Module CNSL............................. : Ok
Module RWCN............................. : Ok
Module CHNM............................. : Ok
Module SRVP............................. : Ok
Module SRVM............................. : Ok
Module ALTC............................. : Ok
Module ZONE............................. : Ok
Module PTRT............................. : Ok
Module RAM0............................. : Ok
Module not read (OVR1)
Error : Device error detected (UNC)
Module not read (OVR1)
Error : Device error detected (UNC)
Device error detected (UNC)
Device error detected (UNC)
Module OVR1............................. : Error
Error : ModStg: composite reading impossible - reading error!
Module SMRT............................. : Ok
Module MLBA............................. : Ok
Module SECI............................. : Ok
Module SRIF............................. : Ok
Module SERL............................. : Ok
Module IDNT............................. : Ok
Module DCOT............................. : Ok
Module BULK............................. : Ok
Module PTCH............................. : Ok
Module SSPT............................. : Ok
Module not read (##01)
Error : Device error detected (UNC)
Module not read (##01)
Error : Device error detected (UNC)
Device error detected (UNC)
Device error detected (UNC)
Module ##01............................. : Error
Error : ModStg: composite reading impossible - reading error!
Module ##02............................. : Ok
Module ##03............................. : Ok
Module ##04............................. : Ok
Module ##05............................. : Ok
Module PESD............................. : Error
Error : Module not read (PESD)
Error : Device error detected (UNC)
Module SRST............................. : Error
Error : Module not read (SRST)
Error : Device error detected (UNC)
Module SSSC............................. : Ok
Module SSCD............................. : Ok
Module NVRC............................. : Ok
Modules reading completed

[pcimage]

That's going to be a tough cookie with PSHT (plist) damaged

[crystalrajasthan]

That's going to be a tough cookie with PSHT (plist) damaged

Yes but any other way to access data.

[pcimage]

How badly are the copies of PSHT damaged?

You may get lucky and find that it's only "00" padding that's unreadable, so you can make a good PSHT module out of the two.

I'll bet the SA is damaged there too, so you'll have to relocate the SA to a different surface.