Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

New HddSurgery tools for Seagate hard drives with 1 platter!

October 22nd, 2012, 9:43

Dear friends and colleagues,

At the request of our colleagues, we have decided to make a head replacement tool set for Seagate hard drives with one platter. This set is meant to complete our offer of Seagate head replacement tools for drives which park their heads on platters.

We are working still, and our offer will soon be expanded with one more head replacement tool set for Seagate hard drives which park their heads on a ramp.

HDDS Sea 7200.12/.11/.10+ p1 Set

Image

The package contains two tools: for drives with 1 platter and 2 heads, and for drives with 1 platter and 1 head. These tools can be used to safely and easily replace heads on Seagate and Maxtor hard drives with 1 platter from following families:

Seagate 7200.12 (DiamondMax 23)
Seagate 7200.11 (DiamondMax 22)
Seagate 7200.10 (DiamondMax 21)
Seagate SV35.5
Seagate LP

Find more info about this set of tools on our website here:
http://www.hddsurgery.com/tool/hdds-sea-7200-12-11-10-p1-set

On the same website for this tool You can also find:

1. Animation - http://www.hddsurgery.com/tool/hdds-sea-7200-12-11-10-p1-set&box=animation
2. Video Guide - http://www.hddsurgery.com/tool/hdds-sea-7200-12-11-10-p1-set&box=video
3. PDF Manual - http://www.hddsurgery.com/dl/HDDS_Sea_7200.12-.11-.10+_p1_Set.pdf

As always, all comments and suggestions are welcome! :)
Post a reply