Maxtor OneTouch II 300 GB Hard Drive - Won't Work (Pics)

[hardluckdrive]

I have a Maxtor OneTouch II 300GB Hard Drive, that will not rev up.

I believe a 19V power input was plugged into it instead of the 12V it requires, and I understand that this is a somewhat common error and that a frequent result is a fried TVS Diode.

I have attached some pictures of the board and I am hoping someone with more knowledge than me can diagnose if this is the problem and, if not, what the issue might be...

I welcome any advice and proposed solutions. Thanks.

[fzabkar]

There are two 12V TVS diodes, CR201 near the power connector, and CR501 near the SMOOTH motor controller. One of them will probably be shorted.

[northwind]

This is a duplicate post (and duplicate answer!!!!) from here: another-maxtor-onetouch-that-won-boot-pics-t24378.html