Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

NVRAM Required for HDP725025GLA380

November 4th, 2012, 12:15

Hi,

I need NVRAM for this drive.

HDP725025GLA380
PCB Sticker: 0A29775
BA2996A

Thanks in Advance

Re: NVRAM Required for HDP725025GLA380

November 6th, 2012, 4:34

What are you going to do with it? :shock:

Re: NVRAM Required for HDP725025GLA380

November 7th, 2012, 4:20

BGman wrote:What are you going to do with it? :shock:


for fixing NVRAM of the existing drive.

No seek after power on. PCB is fine. NVRAM fixing is required

Re: NVRAM Required for HDP725025GLA380

November 7th, 2012, 6:09

NVRAM is unique (almost) for each drive ...

Re: NVRAM Required for HDP725025GLA380

November 7th, 2012, 8:20

BGman wrote:NVRAM is unique (almost) for each drive ...


HMM.

It's possible to fix... with a DONOR...
Do you have the backup pls?

Re: NVRAM Required for HDP725025GLA380

November 7th, 2012, 16:34

When you say "does not seek" do you mean that the drive spins up ok but you cannot hear the heads come off the ramp?

Re: NVRAM Required for HDP725025GLA380

November 8th, 2012, 7:18

pcimage wrote:When you say "does not seek" do you mean that the drive spins up ok but you cannot hear the heads come off the ramp?


nope. it doesn't spin up, heads dont come up... Status comes to READY in doctor, tested pcb with donor, it's fine. NVRAM fixing is required. do u have donor?
Post a reply