Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Bad sectors all hdd (toshina 250GB)

November 19th, 2012, 13:49

Hi
i got toshina 250GB with dad sectors all the hdd. I used HDD Regenarator V1.71 it can recovered but it will take 404 days. Can anyone give advice to solve the problem quickly?

Note:need to recover the data

Regards

Re: Bad sectors all hdd (toshina 250GB)

November 19th, 2012, 14:02

Have you tried with MHDD?

Re: Bad sectors all hdd (toshina 250GB)

November 19th, 2012, 17:19

redseaksa wrote:Hi
i got toshina 250GB with dad sectors all the hdd. I used HDD Regenarator V1.71 it can recovered but it will take 404 days. Can anyone give advice to solve the problem quickly?
Note:need to recover the data


First stop using that software.

Then : 1) diagnose what the problem is (no more than 20 minutes) - 2) put PC3000 UDMA at work and thoroughly check the disk (10 min. max) , 3) determine if media / heads / mechanics are OK and eventually fix it 4) clone the drive and extract data from the clone.

It is the quickest and safest way (and the only one I'm afraid).

If point 2) is not feasible, replace point 2) with OUTSOURCE and leave the problem to the guy who will handle the case.

Re: Bad sectors all hdd (toshina 250GB)

November 20th, 2012, 3:55

Thank you
Post a reply