Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
November 29th, 2012, 20:22
Can someone kindly tell me if this drive has firmware blocked terminal access. I can get terminal output but no terminal input.
Rst 0x20M
RW: Disc Ctlr Initialization Completed.
No HOST FIS-ReadyStatusFlags 2002A1A5
November 30th, 2012, 6:10
Is that 7200.11 or 7200.12 ?
December 2nd, 2012, 20:52
dmarques wrote:Is that 7200.11 or 7200.12 ?
its .12
December 3rd, 2012, 5:42
Have you tried shorting the read channel ?
December 23rd, 2013, 21:09
were you able to solve this issue ... I have same exact problem ..
December 25th, 2013, 7:41
Zero Alpha wrote:Can someone kindly tell me if this drive has firmware blocked terminal access. I can get terminal output but no terminal input.
Rst 0x20M
RW: Disc Ctlr Initialization Completed.
No HOST FIS-ReadyStatusFlags 2002A1A5
Dear Friend Zero Alpha
Hi I Have Solution For Your Problem If You Are In Data Recovery Field And You Have Basic Setup Then Pm Me On My Skypee : smart.computech
I Will Resolve Your Issue.
Yours Friend
Jignesh Pankhania
November 29th, 2014, 13:52
dmarques wrote:Have you tried shorting the read channel ?
which pin i have to short?
Please help!
i can upload the pic.
Powered by phpBB © phpBB Group.