Overlay file read bad

[positivebit]

Samsung M8E (donor) after some hot swap i wanted to restore the drive, so i saved into himself all his modules.

After that, the hdd stay in Busy state endless.

any clue?

(see attached terminal)

Attachments

wah.txt

(740 Bytes) Downloaded 549 times

[hddguy]

Did you restore native SA to all available SA copies?

[BlackST]

Prima di tutto, cosa stai usando ? (pc3000, SD...)
What are you using?

[positivebit]

Pc3k and restored all 3 copies.

[Doomer]

any clue?

yes
Always check how drive wrote it before re-powering

[BlackST]

Ditto.

Most probably either it is not writing correctly OR writing to WRONG locations

[positivebit]

Thanx Doomer & BlackST, reading modules after saving them, show that not modules are fine, so i believe i must find the way to save them in correct position acting on modules table or something like that..

[BlackST]

You should already have module table , unless it is corrupted (all copies ?!?) .

[positivebit]

I agree about modules, but service tracks do not need a position, so i wrote all tracks in all copies, and drive still show Overlay file read bad.
must be something different.

[BlackST]

Non fidarti . Non è un Seagate !
It's not a Seagate, don't trust it.