Seagate 7200.12 1TB fw cc38

[ddd123]

Seagate 7200.12 1TB fw cc38

Hello

we have this drive
the drive is knocing 15sec after spin up and calibration
could anybody help?

LOG:

F3 T>/7

F3 7>X

Head 00 Resistance 00E2
Head 01 Resistance 0142
Head 02 Resistance 00B3
Head 03 Resistance 0163

F3 7>


>
>
> Rst 0x20M
> SIM Error 203F
> No HOST FIS-ReadyStatusFlags 2002A1A5
> ASCII Diag mode
>
> F3 T>V4
>
> Reassigned Sectors List
> Entries: 0000, Retrieved: 0000, Alts: 0000, Removed: 0000, Pending: 0000, GList:
> 0000, RList: 0000
>
> Idx LBA PBA LLLCHS of LBA PLPCHS of PBA SFI Hours Msecs Status
> BBM Mask
>
> F3 T>V1
> User Slip Defect List
> log log log phys phys
> LBA span cumm cyl hd sctr zn cyl sctr SFI PBA
> 0 0 0 0 0 0 0 0 0 4 0
>
> Head 0: entries 1 slips 0
> Head 1: entries 0 slips 0
> Head 2: entries 0 slips 0
> Head 3: entries 0 slips 0
> Total Entries 1 Total Slips 0
>
>
>
> F3 T>/2
>
> F3 2>Z
>
> HighPowerMode
> Spin Down Complete
> Elapsed Time 0.103 msecs
> F3 2>U
>
> HighPowerMode
> ExecuteSpinRequest
>
> Spin Up Complete
> Elapsed Time 6.187 secs
> F3 2>/
>
> F3 T>i4,1,22
>
> F3 T>/1
>
> F3 1>N1
>
> Init SMART Fail
> LED:000000CC FAddr:0024E2DB
> LED:000000CC FAddr:0024E2DB
> LED:000000CC FAddr:0024E2DB
> LED:000000CC FAddr:0024E2DB
> LED:000000CC FAddr:0024E2DB
> Clicking sounds

[Nick_CT]

I had similar case with this error code:

---
SIM Error 203F
No HOST FIS-ReadyStatusFlags 2002A1A5
---

As with your case had error when trying to clear SMART:

---
F3 T>/1
F3 1>N1
Init SMART Fail
LED:000000CC FAddr:0024E2D
---

A solution was to clear g-list, regen translator and repower drive:

---
Rst 0x08M
SIM Error 203F
No HOST FIS-ReadyStatusFlags 2002A1A5
ASCII Diag mode

F3 T>i4,1,22

F3 T>m0,6,2,,,,,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 16, Max Certify Rewrite Retries = not supported

User Partition Format Successful - Elapsed Time 0 mins 00 secs
Zone re-format was skipped.
F3 T>
Rst 0x08M
(P) SATA Reset

ASCII Diag mode
---

Good luck.

[hddguy]

For knocking HDD, why you think is translator? does spindle stop or continue to run? You check ROM is native?

> F3 T>i4,1,22

Are you aware of the non resident glist (NRG) and implications of clearing it?