Hello,
Was hoping to find some help on the HDDGURU Forum.
A friend of mine asked me to try and recover data/pictures (not extremely critical) from a damaged hard drive (photo of drive label attached to thread, click photo to enlarge/read).
I connected the drive to my Window 7 Pro 64 PC using a sata/power cable from the mother board to see if it would recognize the drive (it did not).
I downloaded the Fujitsu/Toshiba Windows Diagnostic Tool Ver. 1.12 (For IDE/ATA/SATA Hard Drives) from here:
http://storage.toshiba.com/storage-serv ... -utilitiesUpon running the utility the drive was recognized. I proceeded to run and Extended Test and received the following Error:
------------------------------------------------------------------
Model Name : FUJITSU MHY2160BH
Serial No. : K43AT862TT2L
Firmware : 0081000D
Total LBA : 12A19EB0 h
Test Name : Extended Test
Result : FAIL
Code : B129Y6
Test Time : 11:45:57, January 07, 2013
The drive did not pass the Extended Test.
An error was detected on the target drive.
-----------------------------------------------------------------
Any assistance in recovering the files would be appreciated.
Thanks,
Mike
- Attachments
-

- Fujistu MHY2160BH