Raid 5 problem

[sempre]

Hi to all!
Please help me!
3 hdds 1 TB. Linux parttion ext3
1 parttion 1,8 TB
IBM DS5020

After the issue the User tried to edit the partition to try to read the data without success!

Tool in runtime not sucess.
rstudio... not acess view 1 partition ext3 not view folder and files...

[ici_lemmy]

I'm not sure you gave enough information to get help...
Do you know the raid parameters ?
What are you hopping there ?

My best choice to solve raid 5 are a pen, paper, hex calc and winhex/X-ways if that's the kind of info you need...

[sempre]

I'm not sure you gave enough information to get help...
Do you know the raid parameters ?

RAID 5 128KB LEFT ASYNC (CONTINUOUS) 3 HDDS

What are you hopping there ?

My best choice to solve raid 5 are a pen, paper, hex calc and winhex/X-ways if that's the kind of info you need...

[lcoughey]

1. What is "the issue" that was first encountered
2. What do you mean with "User tried to edit the partition?"
3. Can you confirm that you have cloned all three drives and are working with the clones?
4. Would you like remote assistance?

[DR-Kiev]

RAID 5 128KB LEFT ASYNC (CONTINUOUS) 3 HDDS

Based on my notes for IBM DSxxxx this is not correct XOR order type.

[ici_lemmy]

Assuming DR-Kiev is right (which is most of the time true regarding RAID I think), you can try ReclaiMe if you are not successfull with a pen and paper.

Additionnaly, lcoughey asked interesting question...

[barak]

Definitely vote for http://www.angeldatarecovery.com

[einstein9]

Assuming DR-Kiev is right (which is most of the time true regarding RAID I think), you can try ReclaiMe if you are not successfull with a pen and paper.

Additionnaly, lcoughey asked interesting question...

tried it many times, and guides you to the wrong direction, 90% wrong