Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

MOMENTUS 5400.6 PCB DEAD OR LOCKED?

April 1st, 2013, 10:32

hi everyone,

Model : ST9500325AS
F/W :0002BSM1
CAPACITY : 500 GB

pcb doesn't response, dead condition.
circuit brake or locked?

please help me.

Thank you advance
Aravind
Attachments
DSC00135.JPG

Re: MOMENTUS 5400.6 PCB DEAD OR LOCKED?

April 1st, 2013, 22:00

Spildit wrote:Ok, if you plug the drive to the power (PSU) does the PSU shuts the entire system down ?

If you place paper/plastic card insulating the contacts to the Head Assembly, (but leave the spindle ones) does the drive spins ?

Do you have tll adaptor ? Can you post a terminal log with PCB on and power up the drive ?

Does it spins ? Does it clicks ?



Thank you Spildit,

if the power supply connect the media no response, system power on

not responding in pcb with power

i check it terminal mode, the error saya "

ÿ
Notet Boot ROM 4.2
Copyright Seagate 2008

Serial FLASH boot code checksum failure!

Boot Cmds:

DS
AP <addr>
WT <data>
RD
GO
TE
BR <divisor>
BT
?
RET
>
Post a reply