Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
April 8th, 2013, 14:15
Hi,
I need to recover data from HD below:
WD1600BEVT-22ZCT0
DCM: HANT2HBB
Defect: 2 heads damaged
I bought the HD:
WD1600BEVT-22ZCT0
DCM: FBCT2ABB
When I opened the HD with DCM: FBCT2ABB, this only has one head.
How to know how many heads has in HD before opening it?
Thanks to all.
April 8th, 2013, 14:33
Read the heads map in ROM.
April 8th, 2013, 15:16
jono-ats wrote:Read the heads map in ROM.
This information is in the descriptions of the hd? Where?
Tks.
April 8th, 2013, 16:26
find one with a close date is something that has worked for me about 90% of the time. also make sure if the clients drive is not a recertify, do not get a recertify.
these two things are on the top label
April 8th, 2013, 17:00
Cleanroom wrote:find one with a close date is something that has worked for me about 90% of the time. also make sure if the clients drive is not a recertify, do not get a recertify.
these two things are on the top label
Thank you very much
Powered by phpBB © phpBB Group.