wd10tmvw - 11zsms4 to sata

[oferav12]

Hey guys

I have replaced the USB to SATA
I know there can solder the PCB card to SATA connection

but i dont remember how
i remember E71 E72 E73 E75 to sata
and i dont know where the power

[Thedemon007]

I see this


source: viewtopic.php?t=25706&f=1&start=0#p174811

[oferav12]

[url="http://jpg.co.il/view/521d8db1e20e1.jpg/"][/url]

[oferav12]

yes but cannot see the picture
and its not the same

I see this


source: viewtopic.php?t=25706&f=1&start=0#p174811

[Thedemon007]

yes but cannot see the picture
and its not the same

You can power via USB.

See this image I found here. The site does not seem to have problems loading

If you can try a search multimeter continuity. A tip on pin usb positive or negative and the other end into the pcb somewhere you suspect. With the HDD without voltage.

Do it at your own risk

[oferav12]

tnx i use this

[hddguy]

Why not just use 771692 PCB?

[Thedemon007]

tnx i use this

This http://utils.ruggero.ws/WD10TMVW/sata-bypass-01.jpg ??

Why not just use 771692 PCB?

What say change to a native sata pcb? is it possible?

[fzabkar]

tnx i use this

This http://utils.ruggero.ws/WD10TMVW/sata-bypass-01.jpg ??

Why not just use 771692 PCB?

What say change to a native sata pcb? is it possible?

Yes, but you need to transfer the contents of the ROM.

[vrtulle]

Hello, I have an external hdd http://www.donordrives.com/western-digi ... drive.html (2060-771761-001)and do not know how, stopped working. He tries to run, but after about minute stops. In managing the disk is seen as uninitialized, any attempt results in an error I / 0 I'd like some advice on the recovery disk or data recovery. thank you
(I have Windows7 x64) on XP behaves the same.
I'm scared to try this tutorial, I drive a lot of data.
Please help, thank you.