Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

Rom needed , any help

November 27th, 2013, 11:07

Hi all,
Looking for ROM

Helios 2.5" - WD10TMVW-11ZSMS1 (USB 3)

ROM Version .................... :00080007 (08.07)
Thanks

Re: Rom needed , any help

November 27th, 2013, 11:12

Cant you reach SA with non-native PCB/ROM? You can restore ROM from #109 and find other modules from generic resource.
Also, if you plan to write in PC3000 as complete ROM then probably it will damage ROM

Re: Rom needed , any help

November 27th, 2013, 11:20

I have this version
Attachments
WDC WD10TMVW-11ZSMS1 01.01A01 WD-WXA1A5159978.zip
(7.26 MiB) Downloaded 262 times

Re: Rom needed , any help

November 28th, 2013, 1:33

hddguy wrote:Also, if you plan to write in PC3000 as complete ROM then probably it will damage ROM

?
You are doing something wrong..

Re: Rom needed , any help

November 28th, 2013, 4:18

Thank's hddguy ! it's work.

Re: Rom needed , any help

November 29th, 2013, 6:06

BlackST wrote:
hddguy wrote:Also, if you plan to write in PC3000 as complete ROM then probably it will damage ROM

?
You are doing something wrong..


I do nothing wrong, I dont have problem writing ROM info. I simply point out that writing complete ROM within PC3K utility can kill PCB....
Post a reply