Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
January 20th, 2014, 22:47
I saw a thread a month ago where Spildit tries to repair a WD HDD by using TEAMVIEWER and lastly the thread-starter decided to purchase bios programmer to repair the drive.
Can any one help me. As i am thinking to buy a BIOS PROGRAMMER to repair WDD HDDs
January 20th, 2014, 22:51
Have a look at the Willem programmers. And then look at the chips you would want to program, and make sure the chosen programmer supports them. You can get them on ebay, but be careful and look closely at what versions they are, as it gets pretty confusing with all the copies out there
January 20th, 2014, 23:00
Actually since i failed to repair some drive which i collected from various sources to get them repaired by WDR which most of the HDD gurus said "A good and capable WD HDD repair util" for reasons best known to HDDGURUS.
Now i have separated the hdd which have bios on the PCBs so that i can program the rom so that they can be repaired. Since i am fund-crunched, I have short-listed EZP2010 Bios programmer costing USD28 and soic 8 adoptor with cable costing usd12 for programming the same. All these HDDs are showing rom as XYZ___ when diagnosed with WDR.
January 21st, 2014, 0:52
Can you at least upload some resources so that we can see what you are talking about?
January 21st, 2014, 11:07
Spildit,
what happened BOSS. I was searching for one of your reply, where some bios programmer was discussed. Nothing other than that.
I am trying to regenarate rom in old disk (i.e., PCB with bios chip built in)
2moro i shall upload of some snapshot of my experiences so that bossed can comment on it.
PLEASE DO NOT MISUNDERSTAND me.
January 21st, 2014, 21:35
Spildit,
can you give link to the thread?
January 21st, 2014, 21:48
why not just search all his threads. That's what I would do. Click on his profile button->search threads
Powered by phpBB © phpBB Group.