Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

see this video please

January 21st, 2014, 17:02

please see this video hope experts you will be help me

https://www.facebook.com/photo.php?v=197323283807831&saved

Re: see this video please

January 21st, 2014, 17:14

i have done selfscan N2,AA,22. after finishing SS the drives is in this condition . i have uploaded app ata0,ata1,but drive is not come on T level

the condition of drive which i posted the video above
now tell me how can i solve this problem


best regards

Re: see this video please

January 21st, 2014, 18:00

Did the STCom program recognise the model of drive correctly
I'm still experimenting with it, but am not convinced it always saves or restores firmware modules correctly
eg on my 7200.7 the ones it saves are full of 00's of ff's
even though I select the correct Alpine 8.x model
and although I've obviously not tried restoring them yet, I am not sure it can

Suggest you use a hex editor to look at the contents of the modules you are uploading

I'll be writing up my STCom findings and experiments in due course

I also have a 7200.2 that I mistakenly self scanned and is now it stuck at F> with no app,cert or ata overlays etc
that I am also experimenting with
Last edited by xsoliman on January 21st, 2014, 18:04, edited 2 times in total.

Re: see this video please

January 21st, 2014, 18:02

spildit which command is used to fix this issue ??

Re: see this video please

January 21st, 2014, 18:29

why ru change old spildit is no need money for help and today spildit donation ,money,and hdd why why why :roll: :roll: :roll:

Re: see this video please

January 21st, 2014, 19:10

spildit i send u 1000 ok happy ?

Re: see this video please

January 21st, 2014, 19:22

:lol: :lol: :lol: :lol: :lol: dear 1000pkr

Re: see this video please

January 21st, 2014, 19:34

spildit i promise please stay some month i will be making money i promise you i will be send you money ok but please help continue help me i am requesting for you dear

Re: see this video please

January 21st, 2014, 23:42

Spildit wrote:Because spildit needs to eat everyday and food costs $$$ so sometimes some $$$ is good, specially if you are asking for my help over and over again !

So you needed like 3 years and another "DR-for-dummies" site to come to this conclusion?
And finally you are "a greedy DR person" who "doesn't want to help" people who just "asking simple questions" and want to "rip them off"

Surprise, surprise :mrgreen:

Re: see this video please

January 22nd, 2014, 8:23

:mrgreen:

Re: see this video please

January 22nd, 2014, 9:13

I wonder what is the exchange rate of "kudos" to Euro and if banks will accept it. :mrgreen:

Re: see this video please

January 22nd, 2014, 9:15

cmon spildit, just fly to india and fix it for him ;)

Re: see this video please

January 22nd, 2014, 12:44

Doomer wrote:
Spildit wrote:Because spildit needs to eat everyday and food costs $$$ so sometimes some $$$ is good, specially if you are asking for my help over and over again !

So you needed like 3 years and another "DR-for-dummies" site to come to this conclusion?
And finally you are "a greedy DR person" who "doesn't want to help" people who just "asking simple questions" and want to "rip them off"

Surprise, surprise :mrgreen:


Sup guys.

I don't think Spildit is greedy, he has HELP a LOT the DR community with his knowledge and different ways to fix hdd problems, Spildit is always willing to help but... there are some users that they don't want to read or learn they just want to get help and thats it, all you gurus don't share all your knowledge cause this is your bread and butter and with what you make a living, you may help at some point but beyond you wont help, cause of course you have family you have kids, you need to pay the rent, I don't see why is bad if he ask for money since you all do.

It is because he has help a lot of people for free? well maybe but he has giving to the community something at least to try out, not ALL who tries DR will have a DR company impossible, there is SO MUCH information on hdd that you need to be on top of this everyday, if you are starting a DR company trust me GOOD LUCK, you may have a PC3K, ATOLA, ST-COM tool or WDR tool, you can have any tool but without knowledge, you are out of luck.

So if Spildit wants to start charging to fix hdd, i don't see why not do IT is your time and your knowledge, people are always going to get mad when new hdd secrets are out, that's normal, a lot of people are pissed with Scott Moulton cause he is giving DR classes.

But in the long run if you want to help for free go for it, if you want to charge go for it, it all depends on what you want.

Cheers.

Re: see this video please

January 22nd, 2014, 13:15

HARD RECOVER wrote::lol: :lol: :lol: :lol: :lol: dear 1000pkr


why he is offering Pakistani rupees (pkr)

Re: see this video please

January 22nd, 2014, 14:08

LoboX wrote:I don't think Spildit is greedy, he has HELP a LOT the DR community with his knowledge and different ways to fix hdd problems, Spildit is always willing to help but...

That will be tuned down to some point, eventually. It is already showing up. Every DR pro has went through it, it's universal, but many people who just started doing DR do not believe in it, they always think they know better. And Spildit will go through it if he becomes a pro in time.
LoboX wrote: I don't see why is bad if he ask for money since you all do.

Me neither, the problem is, some time ago Spildit has been behaving exactly as "HARD RECOVER" guy and wouldn't accept the idea that knowledge costs some money. And finally the day came and he changed his mind.

LoboX wrote:It is because he has help a lot of people for free?

No, it's because some time ago he was saying that "free help" is the only correct way of doing things here and who's not doing that is "a greedy DR guy"

PS:I may have exaggerated some things but that's the general idea
Post a reply