Seagate Barracuda 7200.12 1TB

[xRay_TFB]

Hello everyone!

I have following drive:
Seagate Barracuda 7200.12 1TB
Model: ST31000524AS
S/N: 6VPB9RYL
Firmware: JC45

The drive not making clicking noise or bad sound.
BIOS don't see the drive

On the terminal I see following:
Rst 0x20M
RW: Disk Ctrl Initialization Completed.
(P) SATA Reset

After pressing Ctrl-Z it sometimes shows >, sometimes not.

In success i see
F3 T>
ADCII Diag Mode

and no errors.

Anyone help.

[xRay_TFB]

Also, some diag shows:
F3 T>V40
Nonresident GList 2 entries returned
Total entries available: 2
PBA Len Flags Phy Cyl Hd PhySctr SFI
4DF0D706 1 20 2543E 3 36C 8FF32
55C1368C 1 20 29CA1 3 9C 8DAF9

-----------

X command results:

F3 7>X

Head 00 Resistance 0128
Head 01 Resistance 00D2
Head 02 Resistance 00F3
Head 03 Resistance 00C1

------------

F3 2>s0,0,22

F3 2>R0,1

F3 2>
Current R/W User LBA 000000000A81 LLL CHS 000001.0.0001 PLP CHS 000001.0.0001
R/W Status 1 R/W Error 00000080 Ready

[xsoliman]

Check V4 to see if lots of reallocated or pending stuff

Seems to be several people hitting some .12 busy like issues