LED000000CC Problem that solution can't fix

[infofaster]

Hi Guys,

I have a Seagate ST3500820AS 7200.11 that have the Firmware problem LED0000CC that usually we can fix with the PC3K solutions.
But in this case i can't, i run the solution and make a short-circuit in control points in PCB write/read.
After that the drive can't became ready and run the solution, only show again the terminal log of LED000000CC FAddr:0024A51.
Have any one this problem already?

Thanks for your time

[lcoughey]

Did you inspect the drive internally (within a clean room) to ensure that the heads haven't crashed?

[infofaster]

Yes the drive is ok, doesn't have heads damaged and headcrash.

[infofaster]

No thanks, my intention is to do it my self

[galaxy]

plz try this in hyper terminal

[infofaster]

People i do it, i solve the problem. Now i'm recovering data

[HaQue]

What exactly did you do? I see no steps to follow posted publicly

[infofaster]

In the short circuit can't make the PCB unblock the read/write channels so i made it isolating the motor connections. Drive can read the FW and have sectors access.