7200.11 HDD with no message in terminal

[happygo]

hi all
I have a Seagate 7200.11 HDD
(ST31500341AS fw:CC1H)
with a problem of empty in terminal.
It can be detected in BIOS, with wrong model, wrong FW and wrong LBA.

And I'm sure all cables are in good connection.

Any ideas?
Thanks in advance.

[pcimage]

with wrong model, wrong FW and wrong LBA.

What exactly does it show? Screen shot please

[happygo]

with wrong model, wrong FW and wrong LBA.

What exactly does it show? Screen shot please

Attachments

a.JPG (5.57 KiB) Viewed 6220 times

[helpless]

Take a look here:
http://forum.hddguru.com/viewtopic.php?f=1&t=11403
This error is associated with faulty heads.

[pcimage]

Take a look here:
http://forum.hddguru.com/viewtopic.php?f=1&t=11403
This error is associated with faulty heads.

Exactly so.

Or non-native PCB

Or on (very) rare occasions, the PCB can be bad

[happygo]

Take a look here:
http://forum.hddguru.com/viewtopic.php?f=1&t=11403
This error is associated with faulty heads.

Exactly so.

Or non-native PCB

Or on (very) rare occasions, the PCB can be bad

Thanks.

[happygo]

The disk surface is critically damaged.
If anyone can handle this situation, plz pm me with the price, tks

Attachments

[hdd_sand]

The disk surface is critically damaged.
If anyone can handle this situation, plz pm me with the price, tks

On this drive is not recovery possible, but will be great paperweight