Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
March 30th, 2014, 11:14
Hello all
I have hardly proteced drive from Sagem TV Recorder.
Sagemcom ESI-88HITACHI C5K500 HCC545032B9A300 Disk is not proteced by password. Is proteced by change firmware and modules in SA.
Look photo's
HDDhttps://dl.dropboxusercontent.com/u/84908032/CIMG6361.JPGPCBhttps://dl.dropboxusercontent.com/u/84908032/CIMG6362.JPGHDD without ESLIL labelhttps://dl.dropboxusercontent.com/u/84908032/CIMG6363.JPGELSIL. They proteced this drive
http://www.elsil-tunisia.com/Look this PDF. Page 61.
12.9 Protected Area Function http://www.hgst.com/tech/techlib.nsf/techdocs/1CB2318624655E0186257547007FB08C/$file/CSC5K500_OEM_Specification_R14.pdfWindows XP don't boot with this drive. I must connect it after boot Windows.
#1MHDD:
Command: EID
Result: Busy, busy busy, busy......busy forever
https://dl.dropboxusercontent.com/u/84908032/CIMG6364.JPG#MHDD2
Command: EID
Result: Busy, busy, busy, busy............unplug and connect SATA cable. Get information's
https://dl.dropboxusercontent.com/u/84908032/CIMG6365.JPGI think WD3200BUDT is locked this same as HITACHI.
For WD3200BUDT please look here
http://wdmarvel.com/forum/ru/viewtopic.php?f=3&t=374&sid=0dd78e0b475cc0fb077f850fa7c51798http://forum.hddguru.com/viewtopic.php?f=1&t=21467A lot of reading.
WDMarvel can unlock WD3200BUDT, but this tool is not for hitachi.
Difference ? WD3200BUDT and MHDD:
MHDD support only LBA mode
HGST
Without any message
Hitachi surface scan:
https://dl.dropboxusercontent.com/u/84908032/CIMG6367.JPGHitachi SMART:
https://dl.dropboxusercontent.com/u/84908032/CIMG6366.JPGDUMPSIn this thread, @grubskee read ROM1/NVRAM...
http://forum.hddguru.com/viewtopic.php?f=1&t=23578&p=194463#p194463Readed by IBM-v2c explorer.
I thnik this dump's is corrupted. IBM v2c is old program for IDE drives not for SATA.
DUMPS mirror:
http://www50.zippyshare.com/v/12246114/file.html
April 6th, 2014, 3:26
Hello.
I read two memory from PCB. I use JetProg programmer.
First memory:
LE25fu106b It is 100% ROM:
DUMP:
https://dl.dropboxusercontent.com/u/84908032/LE25fu106b%20org.BINSecond memory:
M93C76-R I don't know what it is. Strange dump. Can you tell me what it is ? It's RAM or what ?
DUMP:
https://dl.dropboxusercontent.com/u/84908032/M93C76-R%20org.BINLook PCB photo.
Red First memory
Green Second memory
https://dl.dropboxusercontent.com/u/84908032/CIMG6362xxx.JPGRegards
@EDIT
I can read/write this memory.
April 6th, 2014, 10:02
Hello,
Kindly mail me the firmware of your hdd. i want to see it ..
Regards
Waqas Ali
April 6th, 2014, 10:06
Locarno, cheaper just buy yourself a new drive, if you only have 1 or 2 ;@)
April 7th, 2014, 11:52
waqas_ali766 wrote:Hello,
Kindly mail me the firmware of your hdd. i want to see it ..
Regards
Waqas Ali
ROM=Firmware. I answer on Sediv forum. bin. readed from eeprom.
April 8th, 2014, 23:04
locarno
I said send me
the promotion
I'll do
All forum for asking
who knows,
and so
no answer
not respond
nobody can answer this
this is normal
Igreet
April 9th, 2014, 16:20
Yes, but maybe I find somebody who share knowledge about that.
May 9th, 2014, 7:28
Well yes, maybe i chould help you on that problem

The HDD is encrypted and Software & Hardware paired in the
OS of the STB.
http://www48.zippyshare.com/v/25866812/file.html/lib/modules
Have fun
May 9th, 2014, 7:33
The second dump that you did is a normal EEprom.
http://www.st.com/web/en/catalog/mmc/FM ... 2/PF208350Maybe the keying or something else could be inside.
May 9th, 2014, 17:02
It's not modules from drive.
It's FW from esi-88
We can read modules from drive using SediV.
It's hard to find encryption in ESI-88 FW. Easier found this in drive modules.
May 9th, 2014, 19:35
If you have a look in the hal3 modul with IDA you see the pairing commands

Possible to step the FW and see what happen´s xD
.export SECU_ioctlGetPrivateKey_f
SECU_ioctlGetPrivateKey_f:
rts
mov #h'FFFFFFFB, r0
; End of function SECU_ioctlGetPrivateKey_f
May 10th, 2014, 11:30
Ok
But If want unlock drive. You must have acess for modules (SA) on drive.
It's is unhelpfull for us.
August 18th, 2014, 10:03
@REFRESH
September 17th, 2014, 6:39
Hi locarno, I have the same problems with Hitachi. Did you find the solutions?
Thanks in advance for your reply.
September 17th, 2014, 8:54
deleted
March 2nd, 2015, 18:03
Something new with Hitachi HITACHI C5K500 HCC545032B9A300 by ELSIL from SAGEM ESI-88 ?? Can anyone solve the problem ?
March 3rd, 2015, 19:51
Hm...yes, but as @locarno says this is the firmware by ELSIL - ESI-88 and what exactly modules ? Does anyone know that ?
April 3rd, 2017, 13:14
Hi
Hello
locked
Hitaci hdd Elsil
manual edit
hitachi ARM HCC543232A7AXXX
https://www.youtube.com/watch?v=pl5LMihIReshitachi old model Elsil HCC545032B9A300
https://www.youtube.com/watch?v=vm5so2SWASAreseler info etc
http://forum.sediv.pl/I greet
Powered by phpBB © phpBB Group.