Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
May 13th, 2014, 3:58
Hello
We have WD 500GB Royl drive
There is unreadable P-List and ATA Module #11
We cannot rewrite the ATA module.
We have Salvation WD HD doctor tool
Can somebody help remotely ?
May 13th, 2014, 22:03
Prepare donor for hot-swap
May 14th, 2014, 8:53
Spildit wrote:Can't do the Module Relocation neither the module auto fix
It was also necessary to try to write (move) modules in Safemode.
May 14th, 2014, 9:35
It's a complex case as the failure is worse than it seems. Remote won't do it. The drive needs a lot of pampering even under the assumption the firmware issue is resolved remotely. And it looks like it needs a new set of heads anyway.
May 14th, 2014, 10:43
Try Reserve ARCO Calibration if you have WDR with some experience.
May 14th, 2014, 10:49
Spildit wrote:Tryed withou loading from hdd (perm ovl). Get ERR and ABRT.
What is the error code ?
Tryed to write to different module address, including to ss log, to replace that space with mod 11.
Load the modified 01h and 11h ?
No luck. Can't write mod 11. Tryed also to power off/on first when new location is set.

Unfortunately I can't explain in English. Sorry.
May 16th, 2014, 6:04
I can teach you it can solve module writing error with no data lost.
Spildit wrote:DataPlanet wrote:Try Reserve ARCO Calibration if you have WDR with some experience.
Would this be SAFE for data ?
DATA is needed.
Powered by phpBB © phpBB Group.