ST500DM002 Not Detect and No Terminal

[gps31]

HDD INFO

Hello Everyone


No Click Sound and no strange sound but not detected in bios and windows.
Just spinng up and Head moves to the edge of the media and stay there , No Spin down.

In Terminal Just got

Code:

Boot 0x10M
Spin Up[0x00000000][0x0000B67C][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset



Then No Response


PCB Both Sides

Let me know the How to Short the read channel and when should short them.
Please guide with the procedure.

Thankyou

Parthipan
gpsparth@gmail.com
Madurai, Tamil Nadu, India
09944552088

[labtech]

Use keywords to search here in the forum

[gps31]

thanks for your reply

Searched the forum, resulting post mentioned to upload the pcb image (Topic in 2013)

I can't find answer for " At what stage i have to short the read channel ?"

Please guide me or point to the correct detailed topic

Thankyou

[labtech]

Likely nobody would find an answer for such an expression: " At what stage i have to short the read channel ?"

And there is no exact answer as it varies. But in general, after the heads lock servo and before the reallocation begins in the background.

[HaQue]

did you open in a clean room? I am wondering how you know:

Just spinning up and Head moves to the edge of the media and stay there , No Spin down

[arztt]

Which contacts did you short on the PCB?

[gps31]

Thanks for reply

1. MHDD did not see hdd.

2. PCB Change NO EFFECT.

3. Shot ( As per 5th Reply in http://forum.hddguru.com/viewtopic.php?f=13&t=28194 )

[Matiw]

Did you click CTRL+Z after Sata reset is shown on the screen ?

HDD INFO



No Click Sound and no strange sound but not detected in bios and windows.
Just spinng up and Head moves to the edge of the media and stay there , No Spin down.

In Terminal Just got

[code]Boot 0x10M
Spin Up[0x00000000][0x0000B67C][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset


Then No Response

[gps31]

Did you click CTRL+Z after Sata reset is shown on the screen ?

No response for Ctrl+Z

just hang with (P) SATA Reset

[labtech]

Read the forum more and be patient with the terminal

[gps31]

http://translate.google.co.in/translate?hl=en&sl=ru&u=http://forum.ru-board.com/topic.cgi%3Fforum%3D84%26topic%3D4756%26glp&prev=/search%3Fq%3DFAIL%2B%2BServo%2BOp%253D0155%2BResp%253D0007%2B%2BResponseFrame%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0000%2B0800%25600000%2B0000%2B0000%2B0000%2B000Ax%255B0x00025CB4%255D%255B0x00025CB4%255DZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZ%2BZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMM%26client%3Dfirefox-a%26hs%3D3Zj%26rls%3Dorg.mozilla:en-US:official%26channel%3Dsb

When you turn the spindle spins without extraneous sounds system and the BIOS is not detect, it is necessary to close the read channel recording, reading and closes here that occur Spin Up [0x00000000] [0x0000B67C] [0x0000BA10]

is it correct ? but I could not lock terminal