WD DRAGFLY1 family : ldr Required :Wd5000AADS - 00S9B0

[nainesh]

WD DRAGFLY1 family : ldr Required

Postby micro999 » Wed Jun 25, 2014 6:49 am
Hello,

Wd - 500 gb : DRAGFLY1 family
Wd5000AADS - 00S9B0
DCM : HGRNHT2AGN

Techno mode key
Techno mode key......................... : Ok

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 2
Cyl Count............................... : 192

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
ROM version............................. : 90.82R
ROM generation.......................... : 90.82R
Link table version...................... : 04.0F.
Consolidated ROM version................ : 00900082

ROM Modules:
Flash ROM dir reading................... : Ok (Active)
Flash ROM dir reading (Ext)............. : Ok
Modules directory address............... : 75 271
SA regions address...................... : by default
SA Translator loading................... : Ok

Heads configuration..................... : by map
Heads number............................ : 2
Heads number in use..................... : 2
Switched off heads...................... : No
Heads map............................... : 0,1
ROM Firmware version.................... : 00900082


Module search process started
Search method........................... : Search by ABA
ABA..................................... : 0
Size in sectors......................... : 184 300
ABA 0 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 1 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 2 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 3 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 4 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 5 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
ABA 6 reading error - Device Error Detected: "VSCE PERM OVL NOT LOADED. LDR Upload is recomended"
Modules found........................... : 0
Module search process completed

How to access modules ? Can anyone Give me loader file ?

Please help

Regards,
micro

[Tawfeek]

here you go
good luck

Attachments

11.rar

(357.26 KiB) Downloaded 385 times

[hhddrec]

Hi nainesh!

Please report us about your progress

Thanks!

[nainesh]

Dear Friend ,Tawfeek Mokhtar

Thank you for your kind support .

Upload Loader but HDD gives sound , look like head 0 damaged .

Trying to get SA using head 1 .

Yet NO Data found .

Regards,
Nainesh

[Tawfeek]

try hot swap may you can get the data your customer need from the other head. otherwise head swap

[mr_spokk]

If head 0 gives sound, I'll suggest you swap heads first...

Bosse