strange message on the terminal command

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
vliriano
  • vliriano
  • Posts: 6
  • Joined: June 30th, 2014, 16:02
  • Location: world

strange message on the terminal command

June 30th, 2014, 16:21

Seagate, Barracuda 7200.12, ST3250318AS, FW: CC38, PCB: 100532367 Rev B, 250GB

F3 T>^C
Spinning Down

Spin Down Complete
Elapsed Time 6.012 secs
Delaying 5000 msec

Jumping to Power On Resetý
Rst 0x08M
No HOST FIS-ReadyStatusFlags 2002A185
ASCII Diag mode

F3 T>

The terminal answer any commands, but HDD is not recognized by the BIOS or
the Operating System.
These images show the data on the HDD.

Wath can i do to solve this throught the terminal?.
Attachments
DSCN9247.JPG
DSCN9244.JPG
DSCN9243.JPG
BGman

Re: strange message on the terminal command

July 3rd, 2014, 3:49

The message means that the translator has been deleted . Maybe by you... :(
Enter V1 command and if you see a long list than I am wrong, If not I am wright.
longlife
  • longlife
  • Posts: 241
  • Joined: December 9th, 2010, 2:59
  • Location: kolkata

Re: strange message on the terminal command

July 4th, 2014, 22:58

BGman wrote:The message means that the translator has been deleted . Maybe by you... :(
Enter V1 command and if you see a long list than I am wrong, If not I am wright.


whether the F3 T>m0,2,2,,,,22 (enter) will regenerate the Translator again??????

I have one hdd same model same problem, do not know how to regain the HDD. Please help.
Madoka
  • Madoka
  • Posts: 79
  • Joined: June 3rd, 2014, 14:18
  • Location: Mitakihara - Japan

Re: strange message on the terminal command

July 5th, 2014, 11:25

longlife wrote:
BGman wrote:The message means that the translator has been deleted . Maybe by you... :(
Enter V1 command and if you see a long list than I am wrong, If not I am wright.


whether the F3 T>m0,2,2,,,,22 (enter) will regenerate the Translator again??????

I have one hdd same model same problem, do not know how to regain the HDD. Please help.


On 7200.12 this will not work. You will need PC-3000 or SD Seagate doctor to fix the translator on those.
BGman

Re: strange message on the terminal command

July 5th, 2014, 15:39

Madoka wrote:
On 7200.12 this will not work. You will need PC-3000 or SD Seagate doctor to fix the translator on those.

Disagree.
BGman

Re: strange message on the terminal command

July 5th, 2014, 17:00

Spildit wrote:
BGman wrote:
Madoka wrote:
On 7200.12 this will not work. You will need PC-3000 or SD Seagate doctor to fix the translator on those.

Disagree.


Uhhhmmm ....

Interesting :)

Mind to elaborate both of you ?


What about the case when NRG list is empty?
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index