st250dm000

Data recovery and HDD repair discussions

Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply
sempre

st250dm000

October 7th, 2014, 16:20

Hello! :mrgreen: :mrgreen:
FIRMWARE: KC45 BARRACUDA

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%

NO access terminal...
sempre

Re: st250dm000

October 7th, 2014, 16:27

sempre wrote:Hello! :mrgreen: :mrgreen:
FIRMWARE: KC45 BARRACUDA

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%

NO access terminal...


short...
is new log...
apparently ready but not the access terminal ..

Boot 0x10M
Spin Up[0x00000000][0x00000000]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005[0x00025CB4][0x00025CB4]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWYWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005[0x0000B319][0x0000B319]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWYWWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005[0x00030FCD][0x00030FCD]ZZZZMMMMMMMMMMMMMMMZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMddddddWWWWMMMMMMSxxxxZWZWZWZWZWZWZWZW
FAIL Servo Op=0055 Resp=0007
ResponseFrame 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 000AB
RECOV Servo Op=0055 Resp=0005
LED:000000EE FAddr:001028A6
data-medics

Re: st250dm000

October 7th, 2014, 18:22

Bad read/write heads.

Have fun.
sempre

Re: st250dm000

October 9th, 2014, 8:36

data-medics wrote:Bad read/write heads.

Have fun.


Thanks!

Sorry,
Swap heads?
sempre

Re: st250dm000

October 9th, 2014, 8:44

sempre wrote:Hello! :mrgreen: :mrgreen:
FIRMWARE: KC45 BARRACUDA

Rst 0x10M
MC Internal LPC Process
Spin Up
(P) SATA Reset

Busy 100%

NO access terminal...


Hi gurus!!! :mrgreen:

Some other comet? :?:
sempre

Re: st250dm000

October 9th, 2014, 9:39

log with motor alone (pcb)

Boot 0x10M
Spin Up
FAIL Servo Op=0100 Resp=0003
ResponseFrame FFFF 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 FFFF
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
FAIL Servo Op=0100 Resp=0003
ResponseFrame 2E8C 0603 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000 0000
LED:000000EE FAddr:001028A6

no access terminal (ctrl + z)
Post a reply
Switch to full style

Powered by phpBB © phpBB Group.

Board index