ST500DM002 Not Detect but terminal

[gps31]

HDD: st500dm002 with firmware KC48

When connected using ZOC, I Got

Boot 0x10M
Spin Up[0x00000000][0x0000B67C][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
ASCII Diag mode

F3 T>
(P) SATA Reset

Please advice me how to get terminal?

[data-medics]

Try Ctl + Z ?

[gps31]

When Keyed Ctl+Z then only F3 T> Prompt appear(Fraction of Seconds only) just before (P) SATA Reset.

if ctl+Z is not keyed then i got

Boot 0x10M
Spin Up[0x00000000][0x0000B67C][0x0000BA10]
Trans.

Rst 0x10M
MC Internal LPC Process
Spin Up
ASCII Diag mode
(P) SATA Reset

[ROb]

What exactly is the problem with your drive ???

[gps31]

It is not detected by BIOS and windows. I need data from the drive