Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

WD2500BMVS

June 9th, 2015, 3:52

Hello,



I receive drive for datarecovery.

First drive not start at all. Then I clean all contacts. After that, drive start producing sounds like sirene( 5 times) and stop.
Drive is detected as Venus family, without model and size.

Re: WD2500BMVS

June 9th, 2015, 4:46

Is that a client's drive?

Re: WD2500BMVS

June 9th, 2015, 4:57

yes it's client drive
Attachments
wd.zip
(155.98 KiB) Downloaded 270 times

Re: WD2500BMVS

June 9th, 2015, 5:47

Are you take a look inside case?

Re: WD2500BMVS

June 10th, 2015, 1:22

Techno mode key
Techno mode key......................... : Ok

Debug Stop Code......................... : DEBUGSTOP CRT RAISE

RAM:
HDD Info reading........................ : Ok
Heads number............................ : 1
Cyl Count............................... : 128

ROM:
ROM reading............................. : Ok
ROM Data size........................... : 192 Kb
Flash ROM dir reading................... : Ok
SA regions address...................... : by default
SA Translator loading................... : Ok

ROM Modules:
ROM version............................. : 08.8WA
ROM F/W version......................... : 0008008W
Overlay F/W version..................... : 08.8WA
Servo F/W version....................... : 01.91

Heads configuration..................... : by map
Heads number............................ : 4
Heads number in use..................... : 4
Switched off heads...................... : No
Heads map............................... : 0,1,2,3


Read ROM
Into file............................... : <HDD Profile>\Data\ROM\ROM_0008008W.bin
ROM Data size........................... : 192 Kb
Ok

Read ROM modules
Into file............................... : <HDD Profile>\Data\ROM
Module : 0A............................. : Ok
Module : 0B............................. : Ok
Module : 30............................. : Ok
Module : 47............................. : Ok
Module : 0D............................. : Ok
Module : 4F............................. : Ok

Re: WD2500BMVS

June 10th, 2015, 2:53

Physical issue I would imagine.

Heads damaged/bad/stuck/mangled I would guess.

Either way, not DIY :-(

Re: WD2500BMVS

June 10th, 2015, 9:22

Problem with head (s).

Re: WD2500BMVS

June 10th, 2015, 10:03

hhddrec wrote:Are you take a look inside case?



I ask because i think the same as pcimage


pcimage wrote:Heads damaged/bad/stuck/mangled I would guess.

Either way, not DIY :-(
Post a reply