Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

St momentus thin.

July 9th, 2015, 10:33

Seagate 320gb thin drive imaging until 17 % then all sectors (unc).
Incomplete translation?
Any thoughts friends?
Thanks in advance.

Re: St momentus thin.

July 9th, 2015, 11:22

Looks lime partial data access.

Re: St momentus thin.

July 9th, 2015, 14:12

Kum Ruzvelt wrote:Looks lime partial data access.

Yes.
Until sector 87,000,000 then all sectors UNC

Re: St momentus thin.

July 9th, 2015, 16:37

Search for fork metod here on the forum or on ACE forum.

Re: St momentus thin.

July 9th, 2015, 17:16

Try regenerate translator, then try rebuild translator. Just be patient, the forking takes a while.

Re: St momentus thin.

July 15th, 2015, 10:15

Do you still have original SA backup? Original NRG list ? Issues like this arise from the translator regeneration without taking NRG into account.

Re: St momentus thin.

July 15th, 2015, 14:11

The drive came to me at this state I didn't do anything yet.
Yes I can access SA and take backup.


Any ideas ?

Re: St momentus thin.

July 17th, 2015, 9:24

I am totally confused with translator - 1) Regeneration 2) Rebuild.
In which circumstance to use both & difference between them and on which drive families.Can someone pls. guide.

Re: St momentus thin.

July 17th, 2015, 15:54

basically the rebuild should not be used if regeneration is done properly. Also, fw backup is another thing to avoid rebuild.
Of course, once some smartass tried rebuilding, it is a huge mess and hard to recover.

Re: St momentus thin.

July 20th, 2015, 16:01

hddbug wrote:I am totally confused with translator - 1) Regeneration 2) Rebuild.
In which circumstance to use both & difference between them and on which drive families.Can someone pls. guide.


Kiran ,
Its Good To See you Participating Here in The Forums .Keep it Up My Pc 3000 UDMA Should Be With Me In 15 Days To 1 Months Time Frame :D
Post a reply