Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
August 18th, 2015, 4:18
Hi to all,
I have a Seagate Barracuda 2000GB that I used for backups on my macbook. While it's doing the backup last night the hdd is dead. Now when I tried to reconnect to the mac it's power on, but I don't access the data on the drive.
I tried to connect the drive to a Windows Pc and the bios don't recognize them. What can I do? There are some possibility to restore my data?
Thanks to all!
August 18th, 2015, 6:15
Good it was only your backup drive, so you still have your original files.
Get a new drive and take a new backup and you will be fine.
August 18th, 2015, 8:25
... unless the replacement is a Seagate.
August 19th, 2015, 3:28
But the problem is that on the drive there are files that I don't have on my mac hdd. Any solutions?
August 19th, 2015, 6:55
gino0o0o wrote:Any solutions?
depends on the problem
gino0o0o wrote:While it's doing the backup last night the hdd is dead.
how ? a power surge ?
gino0o0o wrote:I tried to connect the drive to a Windows Pc and the bios don't recognize them.
is there any unusual noise coming from the HDD ? clicking, knocking ...
August 23rd, 2015, 5:52
Specifica i sintomi che manifesta il tuo hdd...
Emette dei ticchettii continui per caso?
Il motore rimane in rotazione o si spegne dopo pochi secondi dall'accensione?
Powered by phpBB © phpBB Group.