Switch to full style
Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
Post a reply

hitachi 0% health, seagate wont initialize.....

August 29th, 2015, 5:45

hello guys a friend gave me 2 hard drives to check them for her.....
both are 2,5 inches
1)hitachi 2,5 320gb
2)seagate 2,5 320gb

as you ll see fro mthe report i uploaded for the 1st one,its heath is 0%!!!!!
and the 2nd one i cant access it even from disk managment(hard disk unable to initialize......)


i hope you can provide me with your help,not to throw both hdds in the bin if they can be fixed
thanks a lot.......
Attachments
seagate.PNG
hitachi 2nd.PNG
hitachi 1st.PNG
hitachi hdd sentinel.txt
(14.69 KiB) Downloaded 516 times

Re: hitachi 0% health, seagate wont initialize.....

August 29th, 2015, 8:08

somebody guys?...............

also the seagate disk when i plug it inside the laptop as internal to do something via linux or gparted,even bios doesnt open................

Re: hitachi 0% health, seagate wont initialize.....

August 29th, 2015, 9:55

When sentinel shows health 0%, the hdd is not usable, as I have seen hdd showing Health 100% gone kaput in a day.

Re: hitachi 0% health, seagate wont initialize.....

August 29th, 2015, 11:28

any more details about both hard drives.................

Re: hitachi 0% health, seagate wont initialize.....

August 29th, 2015, 11:46

But you need the data from them?
If not, replace them...

Re: hitachi 0% health, seagate wont initialize.....

August 29th, 2015, 15:16

pclab wrote:But you need the data from them?
If not, replace them...


Exactly so..

If you don't need the data then trash them.

Re: hitachi 0% health, seagate wont initialize.....

August 30th, 2015, 5:24

ok i know the one has 0 health so is dead,

but the other one?
any chance to initialize it and assign a letter?

Re: hitachi 0% health, seagate wont initialize.....

August 31st, 2015, 9:03

pclab wrote:But you need the data from them?
If not, replace them...


Still no answer for this...

Re: hitachi 0% health, seagate wont initialize.....

September 28th, 2015, 12:15

longlife wrote:When sentinel shows health 0%, the hdd is not usable, as I have seen hdd showing Health 100% gone kaput in a day.

And what is this supposed to tell us? :lol:
Pretty confusing statement, I must say...but anyways:
I am holding one in my hands at this very moment, which does have a reported 0% health (noticed by pure coincidence since I had HDD Sentinel for DOS running because of another drive).

BUT: Absolutely no data errors, whatsoever. And the disk is not too shabby in capacity (500 GB Maxtor-branded Seagate STM... [SATA]) and 90% full, mind you. Another important fact: no weird noise.
So this health percentage does not necessarily say that the drive is for the bin IMHO.
For a starter, the 0% is reached very quickly when the Reallocated Sectors count increases rapidly...

Although I am reluctant to sell this drive "for parts or not working", I think just for the sake of fair-play, I should :D
Post a reply