Data recovery and disk repair questions and discussions related to old-fashioned SATA, SAS, SCSI, IDE, MFM hard drives - any type of storage device that has moving parts
September 7th, 2015, 13:05
As in topic the drive came with several bad sectors for data recovery.
Start cloning the drive then starting to click, power off and power on the same ( clicking ).
Any thoughts ?
Thanks in advance.
- Attachments
-

September 7th, 2015, 13:17
unknown wrote:As in topic the drive came with several bad sectors for data recovery.
Start cloning the drive then starting to click, power off and power on the same ( clicking ).
Any thoughts ?
Thanks in advance.
when u talk about seagate, always post the terminal log as ref. to the problem
September 7th, 2015, 13:18
EarlySpinup Enabled
Rst 0x10M6
that's only what I get in Terminal.
When short points get this :
EarlySpinup Enabled
Rst 0x10M
ASCII Diag mode
F3 T>
LED:00000067 FAddr:00384F72
LED:00000067 FAddr:00384F72
LED:00000067 FAddr:00384F72
Thanks for reply
September 7th, 2015, 13:31
Heads have failed.
September 7th, 2015, 13:33
pcimage wrote:Heads have failed.
That's the last statement I wanted to see.
Powered by phpBB © phpBB Group.