I need rom file for seagate ST31000528AS-CC46 1t 7200.12

[poya22]

hi
I have a hard disk Seagate 7200.12 ST31000528AS-CC46 1Tb
I think my rom file in eprom (spi flash) is damage
S/N:6VP42D4S
ST31000528AS
P/N:9SL154-568
Firmware :cc46
date code 10496
any body have this version of rom file ?I can not find this rom file
thank you

Attachments

7200-12- 1T-ST31000528AS- 6VP42D4S0000-cc46.rar

(440.91 KiB) Downloaded 656 times

[jermy]

lets say you gonna find it, what do you gonna do with it ?

[data-medics]

lets say you gonna find it, what do you gonna do with it ?

Yes, these aren't exactly cross compatible. Only a few guys in the world supposedly know how to rebuild a lost ROM code for a Seagate F3 family drive.

[poya22]

my hard not detect in bios I want compare it with my self rom
when I change it with ST31000528AS-CC34-5VP06DDT.rar rom file in download section hard disk detect in bios but show Unknown disk in windows

[day1data]

Yes, these aren't exactly cross compatible. Only a few guys in the world supposedly know how to rebuild a lost ROM code for a Seagate F3 family drive.

Can we find these guys

[day1data]

Yes, these aren't exactly cross compatible. Only a few guys in the world supposedly know how to rebuild a lost ROM code for a Seagate F3 family drive.

Can we find these guys

[fzabkar]

Unless I'm mistaken, the date code on the label (10496) doesn't match the date stamp in the CAP (03222014). How is that possible? If the drive were a refurbished unit, then surely it would get the latest firmware?

Code:

Datecode:      10496

Date Code Year:      2010
Date Code Week:      49
Date Code Day:      6
Build Date:      Thursday, June 10, 2010

Code:

Offset(h) 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F

00061630                          00 00 08 00 00 70 03 06          .....p..
00061640  FF FF FF FF 36 56 50 34 32 44 34 53 30 30 30 30  ÿÿÿÿ6VP42D4S0000
00061650  4D 30 33 39 44 45 5A 4A FF FF FF FF FF FF FF FF  M039DEZJÿÿÿÿÿÿÿÿ
00061660  FF FF 04 01 50 00 C5 00 22 8B 48 B0 3F 03 FF FF  ÿÿ..P.Å."‹H°?.ÿÿ
00061670  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00061680  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00061690  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
000616A0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
000616B0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
000616C0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
000616D0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
000616E0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
000616F0  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00061700  FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF  ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00061710  30 33 32 32 32 30 31 34 02 FF FF FF FF FF FF FF  03222014.ÿÿÿÿÿÿÿ
00061720  FF FE 00 00 53 54 33 31 30 30 30 35 32 38 41 53  ÿþ..ST31000528AS
00061730  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20                 
00061740  20 20 20 20 20 20 20 20 20 20 20 20 53 54 33 31              ST31
00061750  30 30 30 35 32 38 41 53 20 20 20 20 20 20 20 20  000528AS       
00061760  20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20                 
00061770  20 20 20 20                                         

[poya22]

yes i guessed this hard was refurbished when I buy it in last year,For the same don't use it.it is empty but it was working
terminal log in normal mode when hard connect to a sata to usb device convertor after one or two head clicking sound
Terminal log file
Date: 11/5/2015 - 12:31:34 PM
-----------------------------------------------
Rst 0x20M
Servo Processor Is Reset.
RW: Disc Ctlr Initialization Completed.
ExecuteSpinRequest
(P) SATA Reset
waiting here

log file in Command mode

Initialization Completed.
ExecuteSpinRequest

F3 T>
ASCII Diag mode
F3 T>
(P) SATA Reset
Input_Command_Error
F3 T>
ASCII Diag mode
F3 T>/2
F3 2>Z
Spin Down Complete
Elapsed Time 10.507 secs
F3 2>U
HighPowerMode
ExecuteSpinRequest
Spin Up Complete
Elapsed Time 5.572 secs
F3 2>/1
F3 1>N1
Clear SMART is completed.
F3 1>/
F3 T>m0,2,2,0,0,0,0,22
Max Wr Retries = 00, Max Rd Retries = 00, Max ECC T-Level = 00, Max Certify Rewrite Retries = not supported

User Partition Format 0% complete, Zone 00, Pass 00, LBA 000000009A64, ErrCode 00000080, Elapsed Time 0 mins 30 secs
User Partition Format Successful - Elapsed Time 0 mins 30 secs
Zone re-format was skipped.
F3 T>
-----------------------------------------------
Date: 11/5/2015 - 12:44:29 PM
End log file
also I use this command for format

m0,5,1,,,,,22 ( it used for erasing of all sector )

end of log file
User Partition Format 99% complete, Zone 10, Pass 00, LBA 000073F6FEAE, ErrCode 00000080, Elapsed Time 220 mins 30 secs
User Partition Format 99% complete, Zone 10, Pass 00, LBA 000074323618, ErrCode 00000080, Elapsed Time 221 mins 00 secs S21(01)
DiagError 0000500D
User Partition Format Failed - Elapsed Time 221 mins 00 secs
R/W Sense 00000002, R/W Error C4090081, File Error 00000000
Blk Addr 000074642BB5, Blk Addr Type 00, Cyl 0003C9F9, Hd 02

maybe head is damage ????

sorry with my bad English

[poya22]

some time connect for one min with sata to usb convertor
but with wrong serial number

Attachments

[digisupport]

How did you drive behave before you changed PCB ? ( besides not being detected in BIOS )

[pepe]

If the rom is needed to be rebuilt, i can help, but this drive seems to have different problems.

pepe

[poya22]

How did you drive behave before you changed PCB ? ( besides not being detected in BIOS )

I did'n change the pcb .At first enter on a halt state, or BuSY state.when used terminal command m0,2,2,,,,,22 with TIAO USB JTAG Multi-Protocol Adapter (it has an usb to RX & TX convertor) windows gone to blue screen error mode and after that hard drive The total broke down.
I would like a little time to fix it,But not worth spending, it is a refurbished hard drive and it has not any data I did used it in a digital video recorder for security camera

If the rom is needed to be rebuilt, i can help, but this drive seems to have different problems.

what you think about with this error?I am a professional repair camcorder and sometimes Unintentionally change data on flash
in camcorder and Just guessed maybe change data in spi flash.i have not any info about hard drive, why serial is J337 when serial in flash is 6VP42D4S in address 061644
thank you

[pepe]

Can we find these guys

you found.

OP: can u post the full rom file?

[fzabkar]

The serial number reported via USB could be the serial number of the bridge hardware, not the S/N of the HDD.

Is the bridge IC a JMicron JM20337 or JM20338?

Can you show us the drive's SMART report?

[pepe]

Ah, he used an USB adapter... yeah, that could be a reason for that.
a direct sata connection would be better.